CNMM 543-NR2:T9325 TURNING INSERT - NEGATIVE
CNMM 543-NR2:T9325 TURNING INSERT - NEGATIVE
PRA6753921
6753921
17.73
/ EA
http://schema.org/OutOfStock
/Product/PRA6753921
- Applicable Materials: Cast Iron, Stainless Steel, Steel and Titanium/Super Alloys
- Chipbreaker: NR2
- Corner Radius: 1.2mm
- Hole Diameter: 6.35mm
- Included Angle: 80°
- Inscribed Circle: 15.875mm
- Insert Size: 543
- Insert Style: CNMM
- ISO Code: CNMM 160612E-NR2:T9325
- Material: Carbide
- Material Grade: K, M, P, S
- Maximum Depth of Cut Decimal Inch: 0.374
- Maximum Depth of Cut Fractional Inch: 3/8
- Maximum Depth of Cut Metric: 9.5
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 16
- Shape: Diamond
- Surface Treatment: MT-CVD Coated
- Thickness: 6.35mm
- Type: 16.1mm
- ANSI Code: CNMM 543-NR2:T9325
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T9325
Single-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 15.575mm, 6.35mm thick, 1.2mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker NR2 with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO ranges P15-P35 and M10-M30, for medium to extra heavy machining of steels and stainless-steels
- Application
- Item Features
- Standards
Heavy Roughing and Finishing
- T9325 grade functionally gradient substrate
- Relatively low content of cobalt binder phase
- Thick MT-CVD coating
- Highly versatile material with very good operational reliability
- Special surface finish for coating
- Medium and higher cutting speed
- Continuous and interrupted cut
- Unfavorable cutting conditions, continuous and/or interrupted cuts
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov