KNUX 160405ER-72:T9325 TURNING INSERT - NEGATIVE
KNUX 160405ER-72:T9325 TURNING INSERT - NEGATIVE
PRA6753829
6753829
14.66
/ EA
http://schema.org/OutOfStock
/Product/PRA6753829
- Applicable Materials: Cast Iron, Stainless Steel, Steel and Titanium/Super Alloys
- Chipbreaker: 72
- Corner Radius: 0.5mm
- Included Angle: 55°
- Inscribed Circle: 9.525mm
- Insert Size: 160405
- Insert Style: KNUX
- ISO Code: KNUX 160405ER-72 T9325
- Material: Carbide
- Material Grade: K, M, P, S
- Maximum Depth of Cut Decimal Inch: 0.157
- Maximum Depth of Cut Metric: 4.0
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 16
- Shape: Parallelogram
- Surface Treatment: CVD Coated
- Thickness: 4.76mm
- Type: 19.5mm
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T9325
Special design negative turning insert, 55° parallelogram with a main edge length of 16mm, 4.76mm thick, 0.5mm nose radius, indexing accuracy according to ISO-tolerance class-U, chip-breaker 72 with rounded cutting edges, in grade T9325, a MT-CVD coated functionally graded WC-Co carbide within ISO range P15-P35, for fine to medium machining of steels with a right handed turning tool
- Item Features
- Standards
- T9325 grade functionally gradient substrate
- Relatively low content of cobalt binder phase
- Thick MT-CVD coating
- Highly versatile material with very good operational reliability
- Special surface finish for coating
- Medium and higher cutting speed
- Continuous and interrupted cut
- Unfavorable cutting conditions, continuous and/or interrupted cuts
- Cutting geometry suitable for grooving and axial turning
- For fine turning and finishing
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov