TNMG 331-FF:T8315 TURNING INSERT - NEGATIVE
TNMG 331-FF:T8315 TURNING INSERT - NEGATIVE
PRA6753624
6753624
9.14
/ EA
http://schema.org/OutOfStock
/Product/PRA6753624
- Applicable Materials: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium/Super Alloys
- Chipbreaker: FF
- Corner Radius: 0.4mm
- Hole Diameter: 3.81mm
- Included Angle: 60°
- Inscribed Circle: 9.525mm
- Insert Size: 331
- Insert Style: TNMG
- ISO Code: TNMG 160404E-FF T8315
- Material: Carbide
- Material Grade: H, K, M, N, P, S
- Maximum Depth of Cut Decimal Inch: 0.059
- Maximum Depth of Cut Metric: 1.5
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 16
- Shape: Triangular
- Surface Treatment: CVD Coated
- Thickness: 3/16in
- Type: 16.5mm
- ANSI Code: TNMG 331-FF T8315
- Country of Origin: CZ
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T8315
- Manufacturer Name: Dormer Pramet
Double-sided negative turning insert, triangular with inscribed circle diameter of 9.525mm, 4.76mm thick, 0.4mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker FF with rounded cutting edges, in grade T8315, a PVD coated fine grained WC-Co carbide within ISO range M05-M20, for fine machining of stainless-steels
- Item Features
- Standards
- T8315 grade highly abrasion resistant material of the T8300 series with guaranteed strength
- Sub-micron substrate with a relatively low cobalt content
- Nano-layered PVD coating with gradient transitions
- Lower internal coating tension with higher hardness
- Lower notch wear on the main cutting edge
- High cutting speeds
- Medium chip cross sections
- Stable machining conditions
- Rounded edge
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov