SCMT 32.51-FM:T8315 TURNING INSERT - POSITIVE
SCMT 32.51-FM:T8315 TURNING INSERT - POSITIVE
PRA6753613
6753613
8.36
/ EA
http://schema.org/OutOfStock
/Product/PRA6753613
- Applicable Materials: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium/Super Alloys
- Chipbreaker: FM
- Corner Radius: 1/64in
- Hole Diameter: 0.177in
- Included Angle: 90°
- Inscribed Circle: 3/8in
- Insert Size: 32.51
- Insert Style: SCMT
- ISO Code: SCMT 09T304E-FM T8315
- Material: Carbide
- Material Grade: H, K, M, N, P, S
- Maximum Depth of Cut Decimal Inch: 0.118
- Rake: Positive
- Relief Angle: 7°
- Seat Size: 9
- Shape: Squared
- Surface Treatment: CVD Coated
- Thickness: 5/32in
- Type: 3/8in
- ANSI Code: SCMT 32.51-FM T8315
- Country of Origin: CZ
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T8315
- Manufacturer Name: Dormer Pramet
- Width: 3/8in
Single-sided positive turning insert, square with 7° clearance, inscribed circle diameter of 9.525mm, 3.97mm thick, 0.4mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker FM with rounded cutting edges, in grade T8315, a PVD coated fine grained WC-Co carbide within ISO range M05-M20, for fine to medium machining of stainless-steels
- Application
- Item Features
- Standards
Finishing to Semi-Roughing Applications
- T8315 grade highly abrasion resistant material of the T8300 series with guaranteed strength
- Sub-micron substrate with a relatively low cobalt content
- Nano-layered PVD coating with gradient transitions
- Lower internal coating tension with higher hardness
- Lower notch wear on the main cutting edge
- Higher cutting speeds
- Medium chip cross sections
- Stable machining conditions
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov