CNMG 432-FF:T8315 TURNING INSERT - NEGATIVE
CNMG 432-FF:T8315 TURNING INSERT - NEGATIVE
PRA6753586
6753586
10.46
/ EA
http://schema.org/OutOfStock
/Product/PRA6753586
- Applicable Materials: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium/Super Alloys
- Chipbreaker: FF
- Corner Radius: 0.8mm
- Hole Diameter: 5.16mm
- Included Angle: 80°
- Inscribed Circle: 12.7mm
- Insert Size: 432
- Insert Style: CNMG
- ISO Code: CNMG 120408E-FF:T8315
- Material: Carbide
- Material Grade: H, K, M, N, P, S
- Maximum Depth of Cut Decimal Inch: 0.059
- Maximum Depth of Cut Metric: 1.5
- Rake: Negative
- Relief Angle: 0°
- Seat Size: 12
- Shape: Diamond
- Surface Treatment: PVD Coated
- Thickness: 4.76mm
- Type: 12.9mm
- ANSI Code: CNMG 432-FF:T8315
- Has Attributes: Yes
- Has Image: Yes
- Manufacturer Grade: T8315
Double-sided negative turning insert, 80° rhomboid with inscribed circle diameter of 12.7mm, 4.76mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-M, chip-breaker FF with rounded cutting edges, in grade T8315, a PVD coated fine grained WC-Co carbide within ISO range M05-M20, for fine machining of stainless-steels
- Application
- Item Features
- Standards
Fine Turning and Finishing
- T8315 grade highly abrasion resistant material of the T8300 series with guaranteed strength
- Sub-micron substrate with a relatively low cobalt content
- Nano-layered PVD coating with gradient transitions
- Lower internal coating tension with higher hardness
- Lower notch wear on the main cutting edge
- Higher cutting speeds
- Medium chip cross sections
- Stable machining conditions
PROP65: This product contains chemicals known to the State of California to cause cancer. For more information: www.P65Warnings.ca.gov