21/32 #630 CARB 118DEG TAPER LGTH
21/32 #630 CARB 118DEG TAPER LGTH
HCT63042
63042
127.60
/ EA
http://schema.org/OutOfStock
/Product/HCT63042
- Cutting Depth: 5-1/8 in
- Cutting Depth Decimal Inch: 5.125
- Cutting Depth Fractional Inch: 5-1/8
- Cutting Depth Metric: 130.175
- Drill Size Fractional Inch: 21/32
- Drill Size Metric: 16.667, 16.669
- Flute Length Decimal Inch: 5.125
- Flute Length Fractional Inch: 5-1/8
- Flute Length Metric: 130.175
- Flute Type: Twist
- Material: Carbide, Tool Steel
- Overall Length Decimal Inch: 9
- Overall Length Fractional Inch: 9
- Overall Length Metric: 228.6
- Point Type: Standard
- Series: 630F
- Shank Type: Straight/Tanged
- Type: Material Specific
- Drill Size Decimal Inch: 0.6562, 0.65625
- Has Attributes: Yes
- Has Image: Yes
- Point Angle: 118 deg
- Item Features
- Standards
- Drills are end cutting tools used to produce holes when rapid removal of material is desired
- Twist drills are generally effective in holes up to 3 tool diameters deep - peck cycles should be used for deeper holes to achieve better chip evacuation
- Longer flute and overall lengths than jobbers length drills
- Carbide tip high temperature brazed to hardened tool steel body
- Smooth flutes for effective chip flow
- Precision ground to insure concentricity of tip and body
- The longer length of these drills increases their effective reach through drill bushings
- For use in ASA split sleeve drill drivers
ASME/ANSI B94.11M|NAS 907|USCTI Standard|ISO Standard|PROP65: This product can expose you to chemicals including cobalt, which is known to the State of California to cause cancer. Carbide dust is a pulmonary irritant. Use proper ventilation & personal protection. More info: www.P65Warnings.ca.gov