/harvey%20tool%20logo_150x150_72dpi_new.jpg)
1/8" 4FL FLAT BOTT LONG RCH CARB C-BORE
1/8" 4FL FLAT BOTT LONG RCH CARB C-BORE
HATL25508-C3
25508-C3
48.40
/ EA
http://schema.org/OutOfStock
/Product/HATL25508-C3
- Bore Diameter: 0.1250 in
- Country of Origin: US
- Cutter Diameter Decimal Inch: 0.125
- Cutter Diameter Fractional Inch: 1/8
- Cutter Diameter Metric: 3.175
- Flute Type: Helical
- Length of Cut Decimal Inch: 0.5
- Length of Cut Fractional Inch: 1/2
- Length of Cut Metric: 12.7
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Number of Flutes: 4
- Overall Length Decimal Inch: 2.5
- Overall Length Fractional Inch: 2-1/2
- Overall Length Metric: 63.5
- Shank Diameter: 0.125in, 1/8 in
- Surface Treatment: AlTiN, C3
- Type: Center Cut Flat Bottom Long Reach
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- Included Angle: 70°
- Neck Diameter: 0.113in
- Overall Reach: 1in
- Shank Diameter Decimal Inch: 0.125
- Shank Diameter Fractional Inch: 1/8
- Application
- Item Features
- Standards
Castings, Rounded Parts, Concaved or Drafted Surfaces , Flat bottom reaming or straightening misaligned holes
- Undersized neck to avoid heeling
- Flat Bottom (No Dish) design allows spot facing or counterboring on irregular surfaces
- Ground with full cylidrical margin (not side cutting)
- Applicable Materials are Non-Ferrous Metal, Cast Iron, Steel, Stainless Steel, Composites
- Cutter Diameter 0.1250 in (1/8)
- Flute Length 0.5000 in (1/2)
- Overall Reach 1.0000 in (1)
- Profile Square
PROP65: This product contains chemicals known to the State of California to cause cancer