/harvey%20tool%20logo_150x150_72dpi_new.jpg)
.115" 5FL 45DEG CARBIDE BACK DUBURRING MILL
.115" 5FL 45DEG CARBIDE BACK DUBURRING MILL
HATL65810
65810
66.60
/ EA
http://schema.org/OutOfStock
/Product/HATL65810
- Angle Per Side: 45°
- Chamfer Center Diameter: 0.1049in
- Chamfer Center Length: 0.0655in
- Chamfer Width: 0.0111 in
- Country of Origin: US
- Cutter Head Diameter: 0.115 in
- End Length: 0.06in
- Flat Width: 0.0600 in
- Head Diameter: 0.115in
- Included Angle: 90 deg, 90°
- Length of Cut Decimal Inch: 0.0111
- Length of Cut Fractional Inch: 1/64
- Length of Cut Metric: 0.282
- Manufacturer Name: Harvey Tool
- Material: Solid Carbide
- Neck Diameter: 0.087in
- Neck Length: 0.562in
- Number of Flutes: 5
- Overall Length Decimal Inch: 2
- Overall Length Fractional Inch: 2
- Overall Length Metric: 50.8
- Shank Diameter Decimal Inch: 0.125
- Shank Diameter Fractional Inch: 1/8
- Shank Type: Cylindrical
- Surface Treatment: UNCOATED
- End Type: Chamfer Threaded
- Hand Direction: Right Hand
- Has Attributes: Yes
- Has Image: Yes
- Application
- Item Features
- Standards
Deburring on backside of small holes and tight pockets
- Slightly undersized to fit in common hole sizes
- Design has smaller radial projection than double angle shank cutters and back chamfer cutters, which results in increased neck diameter and improved strength
- Left hand shear flute / right hand cut evacuates chip away from part
- Applicable Materials are Aluminum, Cast Iron, Steel, Stainless Steel, Wood, Composites
- Axial Length Of Cut 0.0111 in
- Neck Diameter 0.0870 in (2.2 mm)
- Neck Length 0.5620 in (9/16)
- Chamfer Center Length 0.0655 in
- Chamfer Center Diameter 0.1049 in
- Profile Back Chamfer
PROP65: This product contains chemicals known to the State of California to cause cancer