3M™ SCOTCH-WELD™ LOW ODOR ACRYLIC ADHESIVE DP8810NS, GRAY, 490 ML DUO-PAK, 6/CASE

3M™ Scotch-Weld™ low odor acrylic adhesive DP8810NS is our low odor, non-sag, toughened, 2-part acrylic adhesive. This adhesive is an ideal choice for a wide variety of industrial and commercial applications since it reaches structural strength twice as fast as most other competitive acrylic adhesives with a comparable open time. When using a duo-pak (DP) size adhesive, rely on 3M™ dispensing equipment for convenient and accurate metering, mixing and dispensing. Making work safer, faster and more efficient, that's just a few of the benefits of our 3M™ Scotch-Weld™ low odor acrylic adhesive DP8810NS. With a 10:1 mix ratio and a 10 min work life there's time to position substrates prior to adhesion. Once fully cured it will reach 1000 psi (7 MPa) of overlap shear strength in about 21 min, half the time of similar adhesives, increasing throughput and productivity while featuring high peel and impact performance. 3M™ Scotch-Weld™ low odor acrylic adhesive DP8810NS green and gray have been recognized by underwriters laboratories (UL) for use in electrical equipment and electric signs. 3M™ Scotch-Weld™ low odor acrylic adhesive DP8810NS gray should yield similar results as 3M™ Scotch-Weld™ low odor acrylic adhesive DP8810NS green, which has been tested for surface flammability, smoke, toxic gas generation and caloric content per ASTM E162, ASTM E662, ASTM E1354, Bombardier SMP 800-C and Boeing BSS 7239 test methods. With lower odor and non-flammable properties, 3M™ Scotch-Weld™ low odor acrylic adhesive DP8810NS contributes to a safer work environment compared to typical acrylic adhesives. Added non-sag properties assure the adhesive is applied exactly where you want it and won't migrate during the application or bonding processes. And the 18-month room temperature shelf life of the product simplifies inventory management. Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are 2-part adhesives that provide excellent bond strength and durability. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.