CARBIDE BUR - 14DEG TAPER, STEEL CUT
CARBIDE BUR - 14DEG TAPER, STEEL CUT
PFE25168
25168
29.59
/ EA
http://schema.org/OutOfStock
/Product/PFE25168
- Applicable Materials: Cast Steel and Steel
- Country of Origin: DE
- Cut Type: Single
- End Type: Radius
- Head Coating: Bright
- Head Diameter: 1/2 in
- Head Material: Carbide
- Included Angle: 14 deg
- Industry Specification: SL-4
- Length of Cut Decimal Inch: 1.125
- Length of Cut Fractional Inch: 1-1/8
- Length of Cut Metric: 28.575
- Manufacturer Name: PFERD
- Maximum Speed: 20000 rpm
- Overall Length Decimal Inch: 2.75
- Overall Length Fractional Inch: 2-3/4
- Overall Length Metric: 69.85
- Series: High Performance Line
- Shank Diameter Decimal Inch: 0.25
- Shank Diameter Fractional Inch: 1/4
- Head Shape: Taper
- Has Attributes: Yes
- Has Image: Yes
PFERD produces an extensive range of top quality carbide burs and bi-metal hole saws. PFERD burs deliver very high stock removal performance over their entire service life, providing outstanding results in minimal time.
- Application
- Item Features
- Standards
Deburring, Leveling, Milling Out, Cutting Out Holes, Surface Work and Work on Weld Seams
- Up to 50% higher stock removal rate when used on steel and cast steel in comparison to conventional double cut burrs
- Significantly increased aggressiveness, large chips and very good chip removal resulting from the innovative tooth geometry
- Workpiece is protected through much lower thermal load
- https://www.youtube.com/watch?v=QnSA_JP-q2A
PROP65: California to cause cancer. www.P65Warnings.ca.gov/product