VCGT 2.522-FM2:T8330 TURNING INSERT - POSITIVE

PRA7156941 MFG #: 7156941
$112.88 / PK (10)
  • Manufacturer Grade: T8330
  • Insert Style: VCGT
  • Insert Size: 2.522
  • Inscribed Circle Size: 7.94 mm
  • Insert Seat Size: 13
  • Corner Radius: 0.8mm
  • Chipbreaker: FM2
  • Surface Treatment: CVD Coated
  • ANSI Designation: VCGT 2.522-FM2 T8330
  • Application: Finishing and Medium Machining
  • Attributes (Y): Y
  • For Use On: Hardened Steel, Cast Iron, Stainless Steel, Aluminum, Steel and Titanium, Super Alloys
  • Hole Diameter: 3.4mm
  • Image (Y): Y
  • Included Angle: 35°
  • ISO Designation: VCGT 130308E-FM2 T8330
  • Material: Carbide
  • Material Grade: H, K, M, N, P, S
  • Maximum Depth of Cut: 3.3 mm
  • Rake: Positive
  • Relief Angle:
  • Shape: Diamond
  • Thickness: 3.18 mm
Single-sided positive turning insert, 35° rhomboid with 7° clearance, inscribed circle diameter of 7.94mm, 3.18mm thick, 0.8mm nose radius, indexing accuracy according to ISO-tolerance class-G, chip-breaker FM2 with rounded cutting edges, in grade T8330, a PVD coated fine grained WC-Co carbide within ISO ranges P25-P40 and K20-K40, for fine to medium machining of steels and cast-irons
Pack: 10/PK
QTY
  • Item Features
  • T8330 grade sub-micron substrate with a relatively high cobalt content
  • Cutting geometry particularly suited to parting and grooving
  • Suitable for turning, with an indexing accuracy to ISO tolerance class-G and chipbreakers on one side only
  • FM2 chipbreaker - positive geometry with low cutting resistance
  • Improved cutting edge stability
  • Straight cutting edge
  • Very good chip control at low feed and depth of cut
  • High quality of surface finish
  • Increased performance and tool life in combination with the upgrade grades
  • Supports existing FM chipbreaker
  • Positive geometry with a protective land
  • Nano-layered PVD coating with gradient transitions
  • Continuous and interrupted cut
  • Lower internal coating tension with higher hardness
  • Lower notch wear on the main cutting edge
  • Medium cutting speeds
  • Good operative reliability
  • Impaired machining conditions
  • Extremely universal cutting geometry, generates a very low cutting force and has good stability
  • Suitable for slightly interrupted cut